Previous
Next
Sino Galvo 14mm SG2208 Galvo Scanner
- The standard aperture is 14mm
- One driver board with two motors
Previous
Next
Sino Galvo 14mm SG2208 Galvo Scanner
- The standard aperture is 14mm
- One driver board with two motors
Technical Parameters
Technical Parameters
Aperture | 14mm |
Wavelength | 355nm/532nm/1030nm-1080nm/9.4µm-10.6µm Broadband Coatings:350nm-12µm |
Speed | |
Marking Speed(1) | 4500mm/s |
Writing Speed(2) | 292cps |
Step Response Time(1% of full scale) | 510μs |
Step Response Time(10% of full scale) | 1540μs |
Tracking Error Time | ≤202μs |
Precision and Error | |
Linearity | 99.90% |
Repeatability (RMS) | <8μRad |
Gain Error | <5mRad |
Zero Offset | <5mRad |
Long-term Drift Over 8 Hours | <0.5mRad |
Scale Drift | <40PPM/℃ |
Zero Drift | <15μRad/℃ |
Power and Signal | |
Input Voltage | ±15VDC |
Rated Current | 2A |
Interface Signal | Digital:XY2-100 |
Analog:±5V | |
Mechanical Scan Angle(3) | ±11° |
Working Current, Temperature, Dimension | |
Working Temperature | 0℃–45℃ |
Storage Temperature | -10℃–60℃ |
Galvanometer Scanner Dimension (LxWxH) | 126x98x105mm |
Galvanometer Scanner Weight | ≈1.85Kg |
Note: The above data are tested after 30 min warm-up
(1)With F-theta objective, F=160mm, marking 2mm height single character
(2) With F-theta objective, F=160mm, marking 1mm height single character per second
(3) The factory default value is ±11°. Other special requirement is available to be customized.