Sino galvo MC1603-A camera positioning system
- Computer vision positioning module (Provide functions as: accurate image alignment marking,lens correction, image overlap and etc.)
- Eastern logic UMC4 Control board & software
- 7mm~10mm beam input aperture available
Sino galvo MC1603-A camera positioning system
- Computer vision positioning module (Provide functions as: accurate image alignment marking,lens correction, image overlap and etc.)
- Eastern logic UMC4 Control board & software
- 7mm~10mm beam input aperture available
Product Features
Technical Parameters
Product Features
FEATURES OF camera positioning system
- Built-in 13 million pixel camera, positioning accuracy error is only 0.1mm.
- With the visual positioning module, it can automatically search for the target and calculate the marking position.
- With the shape selecting function, it can automatically skip marking on the projects of unqualified shapes during processing.
- Various symbols and patterns can be marked on workpieces of different shapes
Technical Parameters
| Speed | |
| Marking Speed(1) | 5000mm/s |
| Positioning Speed(1) | 9000mm/s |
| Writing Speed(2) | 516cps |
| Step Response Time(1% of full scale) | 370μs |
| Step Response Time(10% of full scale) | 630μs |
| Tracking Error Time | ≤202μs |
| Precision and Error | |
| Linearity | 99.90% |
| Repeatability (RMS) | ＜8μRad |
| Gain Error | ＜5mRad |
| Zero Offset | ＜5mRad |
| Long-term Drift Over 8 Hours | ＜0.5mRad |
| Scale Drift | ＜40PPM/℃ |
| Zero Drift | ＜15μRad/℃ |
| Power and Signal | |
| Input Voltage | ±15VDC |
| Rated Current | 2A |
| Interface Signal (Digital) | XY2-100 |
| Mechanical Scan Angle(3) | ±11° |
| Working Current, Temperature, Dimension | |
| Working Temperature | 0℃–45℃ |
| Storage Temperature | -10℃–60℃ |
| Aperture | 10mm |
| Galvanometer Scanner Dimension (LxWxH) | 134×96.5×120.6mm |
| Galvanometer Scanner Weight | ≈0.9Kg |
Note: The above data are tested after 30 min warm-up
(1)With F-theta objective, F=160mm, marking 2mm height single character
(2) With F-theta objective, F=160mm, marking 1mm height single character per second
(3) The factory default value is ±11°. Other special requirements could be customized.
