Previous
Next
SC1603-10 Handheld galvo scanner
- Bearing power: ≤100W Pulsed laser
- Optional scanning fields: 70×70mm/110×110mm
- Self-developed control board and software
Previous
Next
SC1603-10 Handheld galvo scanner
- Bearing power: ≤100W Pulsed laser
- Optional scanning fields: 70×70mm/110×110mm
- Self-developed control board and software
Technical Parameters
Technical Parameters
| Aperture | 10mm |
| Wavelength | 1064nm |
| Speed | |
| Marking Speed(1) | 4000mm/s |
| Writing Speed(2) | 301cps |
| Step Response Time(1% of full scale) | 372μs |
| Step Response Time(10% of full scale) | 630μs |
| Tracking Error Time | ≤202μs |
| Precision and Error | |
| Linearity | 99.90% |
| Repeatability (RMS) | ＜8μRad |
| Gain Error | ＜5mRad |
| Zero Offset | ＜5mRad |
| Long-term Drift Over 8 Hours | ＜0.5mRad |
| Scale Drift | ＜40PPM/℃ |
| Zero Drift | ＜15μRad/℃ |
| Power and Signal | |
| Input Voltage | ±15VDC |
| Rated Current | 2A |
| Interface Signal | XY2-100 |
| Mechanical Scan Angle(3) | ±11° |
| Working Current, Temperature, Dimension | |
| Working Temperature | 0℃–45℃ |
| Storage Temperature | -10℃–60℃ |
| Marking Format | 70×70mm/110×110mm |
| Galvanometer Scanner Weight | ≈1.35Kg |
Note: The above data are tested after 30 min warm-up
(1)With F-theta objective, F=160mm, marking 2mm height single character
(2) With F-theta objective, F=160mm, marking 1mm height single character per second
(3) The standard mechanical scanning angle is ±11°. Other special requirement is available to be customized.
