Sino Galvo OM9100 Off-line laser control system
OM9100 is completely out of the control of the computer and only needs to be generated in advance. The data is stored in the board or communicated with the outside through the protocol, and then through the external contact send (key), serial, or network communication to mark it.
Sino Galvo OM9100 Off-line laser control system
OM9100 is completely out of the control of the computer and only needs to be generated in advance. The data is stored in the board or communicated with the outside through the protocol, and then through the external contact send (key), serial, or network communication to mark it.
1. Abundant peripheral interfaces
3 serial ports, 2 USB, 1 100M Ethernet port, 17 external interrupt GPIO, this offline board has abundant peripheral expansion interfaces, which is highly expandable and easy to communicate with external interfaces.
2. Function can be realized
2.1 How to generate marking content
① Save in advance
Put text, QR code, barcode, serial number, date, bitmap, vector diagram and other data into the offline board in advance, and then trigger marking.
② Generated by external protocol
By formulating the protocol, the offline board can receive data through serial port or network port, and then generate marking content (currently under development).
2.2 Trigger marking
① External IO, trigger marking by judging the IO status
② Through serial communication, according to the protocol, control marking by receiving serial data.
③ Through network communication, according to the agreement, control marking by receiving network data.
