Previous
Next
SG1403 2 axis galvo scanner with 10mm aperture
- The standard aperture is 10mm
- 900g total weight, can be integrated into different application.
- Adopt US imported motor, high precision
Previous
Next
SG1403 2 axis galvo scanner with 10mm aperture
- The standard aperture is 10mm
- 900g total weight, can be integrated into different application.
- Adopt US imported motor, high precision
Product Features
Technical Parameters
Product Features
2 axis galvo scanner Features
- Adopted with high-performance scanning motor which imported from the America and the international advanced photoelectric sensing technology.
- Drives with advanced detection ability of position and speed, greatly improved the dynamic response performance and scanning speed of the whole system.
- Design of overload, over-current and reverse connect protection, makes the system running more reliable.
- The whole system adopted the Optimization Designing of electromagnetic compatibility, with high signal-to-noise ratio and strong anti-interference ability.
Technical Parameters
| Aperture | 10mm |
| Wavelength | 355nm/532nm/1030nm-1080nm/9.4µm-10.6µm Broadband Coatings:350nm-12µm |
| Speed | |
| Marking Speed(1) | 10000mm/s |
| Positioning speed(1) | 15000mm/s |
| Writing Speed(2) | 400cps |
| Step Response Time(1% of full scale) | 340μs |
| Step Response Time(10% of full scale) | 520μs |
| Tracking Error Time | ≤178μs |
| Precision and Error | |
| Linearity | 99.90% |
| Repeatability (RMS) | ＜8μRad |
| Gain Error | ＜5mRad |
| Zero Offset | ＜5mRad |
| Long-term Drift Over 8 Hours | ＜0.5mRad |
| Scale Drift | ＜40PPM/℃ |
| Zero Drift | ＜15μRad/℃ |
| Power and Signal | |
| Input Voltage | ±15VDC |
| Rated Current | 2A |
| Interface Signal | Digital:XY2-100 |
| Analog:±5V | |
| Mechanical Scan Angle(3) | ±11° |
| Working Current, Temperature, Dimension | |
| Working Temperature | 0℃–45℃ |
| Storage Temperature | -10℃–60℃ |
| Galvanometer Scanner Dimension (LxWxH) | 100x77x77.5mm |
| Galvanometer Scanner Weight | ≈0.9Kg |
Note: The above data are tested after 30 min warm-up
(1)With F-theta objective, F=160mm, marking 2mm height single character
(2) With F-theta objective, F=160mm, marking 1mm height single character per second
(3) The standard mechanical scanning angle is ±11°. Other special requirement is available to be customized.
