Previous
Next
SG7310E Cheap galvo scanner with 10mm aperature
- Red pointer is available to add, help focusing
- More stable and faster than SG7110
Previous
Next
SG7310E Cheap galvo scanner with 10mm aperature
- Red pointer is available to add, help focusing
- More stable and faster than SG7110
Technical Parameters
FAQ
Technical Parameters
SG7310E Cheap galvo technicalparameters
| Aperture | 10mm |
| Wavelength | 355nm/532nm/1030nm-1080nm/9.4µm-10.6µm Broadband Coatings:350nm-12µm |
| Speed | |
| Marking Speed(1) | 8000mm/s |
| Writing Speed(2) | 540cps |
| Step Response Time(1% of full scale) | ＜450μs |
| Step Response Time(10% of full scale) | ＜1000μs |
| Tracking Error Time | ≤164μs |
| Precision and Error | |
| Linearity | 99.90% |
| Repeatability (RMS) | ＜8μRad |
| Gain Error | ＜5mRad |
| Zero Offset | ＜5mRad |
| Long-term Drift Over 8 Hours | ＜0.5mRad |
| Scale Drift | ＜40PPM/℃ |
| Zero Drift | ＜15μRad/℃ |
| Power and Signal | |
| Input Voltage | ±15VDC |
| Rated Current | 2A |
| Interface Signal | Digital:XY2-100 |
| Analog:±5V | |
| Mechanical Scan Angle(3) | ±11° |
| Working Current, Temperature, Dimension | |
| Working Temperature | 0℃–45℃ |
| Storage Temperature | -10℃–60℃ |
| Galvanometer Scanner Dimension (LxWxH) | 118.5×96.5×93.6mm |
| Galvanometer Scanner Weight | ≈1.65Kg |
Note: The above data are tested after 30 min warm-up
(1)With F-theta objective, F=160mm, marking 2mm height single character
(2) With F-theta objective, F=160mm, marking 1mm height single character per second
(3)The standard mechanical scanning angle is ±11°. Any special requirement is available to be customized.
FAQ
