Sino Galvo 14mm SG8214-G Galvo Scanner (With water cooling system)
- The standard aperture is 14mm
- With water-cooling structure
Sino Galvo 14mm SG8214-G Galvo Scanner (With water cooling system)
- The standard aperture is 14mm
- With water-cooling structure
Technical Parameters
Technical Parameters
| Aperture | 14mm |
| Wavelength | 355nm/532nm/1030nm-1080nm/9.4µm-10.6µm Broadband Coatings:350nm-12µm |
| Water cooling control | |
| Water temperature | 25±3℃ |
| Maximum water pressure | ＜3bar |
| Flow rate | >1L/min |
| Water pipe specification | Outer diameterφ6mm,Inside diameterφ4mm |
| Speed | |
| Marking Speed(1) | 8000mm/s |
| Writing Speed(2) | 364cps |
| Step Response Time(1% of full scale) | 508μs |
| Step Response Time(10% of full scale) | 820μs |
| Tracking Error Time | ≤360μs |
| Precision and Error | |
| Linearity | 99.9% |
| Repeatability (RMS) | ＜8μRad |
| Gain Error | ＜5mRad |
| Zero Offset | ＜5mRad |
| Long-term Drift Over 8 Hours | ＜0.5mRad |
| Scale Drift | ＜40PPM/℃ |
| Zero Drift | ＜15μRad/℃ |
| Power and Signal | |
| Input Voltage | ±24VDC |
| Rated Current | 4A |
| Interface Signal | Digital:XY2-100 |
| Analog:±5V | |
| Mechanical Scan Angle(3) | ±12.5° |
| Working Current, Temperature, Dimension | |
| Working Temperature | 0℃–45℃ |
| Storage Temperature | -10℃–60℃ |
| Galvanometer Scanner Dimension (LxWxH) | 174.5x120x127mm |
| Galvanometer Scanner Weight | ≈4.0Kg |
Note: The above data are tested after 30 min warm-up
(1)With F-theta objective, F=160mm, marking 2mm height single character
(2) With F-theta objective, F=160mm, marking 1mm height single character per second
(3) The factory default value is ±12.5°. Other special requirement is available to be customized.
